Reduces or eliminates slipping automatic transmissions;
Reduces or eliminates noise, vibration and transmission shudder;
Decreases loads on automatic transmissions;
Increases performance level;
Improves accuracy of operation immediately (within 2 - 10 miles) and the process is complete in 1,250 miles;
Prolongs transmission life;
Reduces heat during operation;
Services transmissions with over 100,000 miles (that may not be eligible for regular transmission service);
Helps reduce fuel consumption;
Can be used in any hydraulic system;
Lasts up to 65,000 miles.
FriktionTek® is an eco-friendly product. It is non-toxic and non-flammable. FriktionTek® Ceramic Engine oil additive consists of a natural ceramic compound suspended in a synthetic gel. It contains no PTFEs, metals, detergents, or waxes. Unlike some other ceramic treatments, FriktionTek® does not contain harmful additives like chlorines and carbons.
Due to the particle size, FriktionTek® cannot clog oil filters or hoses. It only works on metal surfaces and has no effect on fibrous material such as clutch plates, seals or gaskets. FriktionTek® is compatible with all automatic transmission fluid types and oil additives.
Warm your engine to its normal running temperature.
Add FriktionTek® to transmission fluid filler tube. To help the gel travel down the filler tube. we recommend that you warm the gel to 90ºF.
Drive for at least 15 minutes.
FriktionTek can be warmed by placing the sealed cartridge on your car's dashboard (use the defroster on high if it is cold) while warming engine. For sealed transmissions, take your vehicle to your local dealer or mechanic for installation.
Most vehicles: 18 ML cartridge
Long haul tractors: two 18 ML cartridges.