10W-40 Diesel Truck Ceramic-Metal Oil

10W-40 Diesel Truck
Top-quality semi-synthetic motor oil for diesel engines of heavy-duty trucks. Contains the patented ceramic-metal conditioner.

FriktionTek® Engine Treatment is recommended prior to the first time you use ceramic-metal oil.

10W-40 Diesel Truck is a multigrade top-quality semi-synthetic motor oil for diesel engines of trucks. This motor oil is formulated on the complex of the base oils of hydrocracking synthesis (HC) technology with very high viscosity index. Alloyed with the special additive package for heavy-duty trucks. Its characteristics exceed the highest requirements of European specification ACEA E4 and standards of the leading auto manufacturers MB 229.5, VDS-2, MAN 3277 for the oils for engines UHPD (Ultra High Performance Diesel).

Life span, reliability and power of the engine will be always kept in top condition due to the patented ceramicl-metal formula.

The ceramic-metal formula simultaneously restores and protects worn parts creating a smoother, more durable surface. It effectively optimizes performance while reducing friction and wear.

Advantages

• Ensures safe performance of engines of heavy-duty trucks under any operation conditions, including maximum speed, loads and long distance run.
• Especially recommended for trucks, specializing on international transportations: long-haul busses and heavy haulers.
  Has a unique reserve of performance level and ensures longer drain intervals (up to 120 000 km, MB 228.5)
• Due to a very high base number (TBN >15) it ensures effective protection of engines even with the use of fuel with high sulfur content
• Keeps engine in top-condition and reduces appreciably maintenance costs
• Assures clean fuel burning, reduces effectively harmful emissions in the air
• Due to the revitalizant, it protects perfectly engines and turbocharger against wear and cylinder walls from buffing, extending service-life of the engine by 2-3 times.

Viscosity 10W-40 Diesel Truck ensures easy engine start at very low temperatures and high protection from overheating and wear under intensive operating conditions.

The base oil 10W-40 Diesel Truck is formulated from the high quality hydrocarbons of the oil from the shelf oilfield of the North Sea with the use of hydrocracking synthesis (HC) technology.

XADO Atomic Oil 10W-40 Diesel Truck exceeds the requirements of the most strict European specification ACEA E4 for motor oils for engines UHPD (Ultra High Performance Diesel) and is recommended to be used in engines Euro-3 (increased environmental safety).

10W-40 Diesel Truck meets the requirements of specifications:
SAE 10W-40
ACEA E4
API CF

10W-40 Diesel Truck meets the requirements of the auto manufacturers:
MB 228.5
Volvo VDS-2
Scania Long drain
MAN 3277
Renault (RVI) D5R
MTU Type 3

Typical properties:
Density at 20 °C, kg/l - 0.873
Viscosity at 100 °C, mm2/s - 14.1
Viscosity at 40 °C, mm2/s - 90
Viscosity at -25 °C, mPa s - <7000
Viscosity index - 150
Flash point, °C - 220
Pour point, °C - <-36
Sulphated ash, wt.- 1.8
Base number, mgKOH/g - 15.4

10 liters

20 liters

60 and 200 liters

back to top

XADO™ America LLP © 2008 All Rights Reserved | Sitemap | Disclaimer | Contact | 1-888-399-9090