FriktionTek® Automatic Transmission Treatment &
FriktionTek® Power Steering Treatment
(also for Hydraulic Systems)

FriktionTek® simultaneously restores and protects worn parts creating a smoother, more durable surface. It effectively optimizes performance while reducing friction and wear.

While the science is advanced, the application is simple. FriktionTek® by XADO works by applying a long-lasting ceramic-metal (cermet) surface to high-mileage engines while you drive. It penetrates metal surfaces up to 30 microns deep and forms a strong new ceramic-metal bond.

Although the technology provides similar benefits to traditional lubricants, it works in a completely different way. Instead of modifying the oil, FriktionTek® modifies the surface structure of the metal to make it act more like a ceramic. Ceramics and ceramic-metal alloys (known for their strength, durability, smoothness, high heat-resistance and regenerative properties) have been used as a spray coating for decades in racing and industry, including aviation and nuclear submarine propulsion. With FriktionTek®, a ceramic-metal coating can now be applied without disassembly. By eliminating labor, FriktionTek® provides a huge cost-savings with the same benefit.

FriktionTek® is an eco-friendly product. It is non-toxic and non-flammible. FriktionTek® consists of a natural ceramic compound suspended in a synthetic gel. It contains no PTFEs, metals, detergents, or waxes.

Due to the particle size, FriktionTek® cannot be removed by oil filters nor can it clog hoses or filters. FriktionTek® only works on metal surfaces and has no effect on seals or gaskets. FriktionTek® is compatible with all oil types and oil additives.

Select : Advantages | Characteristics | Instructions | Dosage | Buy Online


Advantages

  • Restores and protects metal-to-metal surfaces of the cylinder-piston group, crank, beerings, and gas distributing parts (including turbo) against wear;
  • Increases engine power;
  • Improves acceleration capability;
  • Decreases noise and vibration;
  • Increases oil pressure to the nominal one;
  • Restores compression in cylinders;
  • Extends service life of the engine parts ( up to 2-3 times longer);
  • Improves cold starts and protects the engine against their negative consequences;
  • Reduces fuel consumption (by up to 30% at idling);
  • Decreases harmful emissions;
  • Shows noticeable improvment within 75 - 100 miles and continues to improve for 1,250 miles;
  • Lasts up to 65,000 miles.

Technical characteristics

  • General characteristics of the cermet layer:
  • Microhardness – 750 kg/mm2;
  • High corrosion resistance;
  • Roughness Ra up to 0.06 mkm.

Instructions and Dosage

Automatic Transmission Treatment

    • Most automatic transmissions require one treatment of one 18 ML cartridge.
    • To help the gel travel down the filler tube, we recommend that you add the gel to a minimum of 1 oz of ATF oil.
    • Drive for 15 minutes.

Treatment is complete after 100 hours operation.


Application for Steering Pump

    • Add the treatment into the steering pump reservoir.
    • Check the operating oil level.
    • After adding FriktionTek, drive for 5-10 minutes.

Treatment is complete after 50 hours operation.

Dosage

  • Steering Pumps (1-2 quart oil system volume) | 9 ML Cartridge
  • Automatic Transmission (2-5 quart oil system volume) | 18 ML Cartridge
  • Hydraulic systems with 5-8 quart oil system volume | two 18 ML Cartridges

Note!

  • A sign that the treatment is working is operation accuracy, noise reduction and steering wheel force augmentation ( in steering gear operation), as early as the first few miles of running.
  • If, after 75-100 miles, improvement does not occur, the part may either be beyond repair or is a mistaken diagnostics.
 
   
 


 


 

 

 

 

 

 
 
   
   
   
   


 

 

US EnviroTech, Inc. © 2008 All Rights Reserved | Sitemap | Disclaimer | Contact | 888-526-3318