FriktionTek® Engine Treatment

FriktionTek® simultaneously restores and protects worn parts creating a smoother, more durable surface. It effectively optimizes performance while reducing friction and wear.

While the science is advanced, the application is simple. FriktionTek® by XADO works by applying a long-lasting ceramic-metal (cermet) surface to high-mileage engines while you drive. It penetrates metal surfaces up to 30 microns deep and forms a strong new ceramic-metal bond.

Although the technology provides similar benefits to traditional lubricants, it works in a completely different way. Instead of modifying the oil, FriktionTek® modifies the surface structure of the metal to make it act more like a ceramic. Ceramics and ceramic-metal alloys (known for their strength, durability, smoothness, high heat-resistance and regenerative properties) have been used as a spray coating for decades in racing and industry, including aviation and nuclear submarine propulsion. With FriktionTek®, a ceramic-metal coating can now be applied without disassembly. By eliminating labor, FriktionTek provides a huge cost-savings with the same benefit.

FriktionTek® is an eco-friendly product. It is non-toxic and non-flammible. FriktionTek® consists of a natural ceramic compound suspended in a synthetic gel. It contains no PTFEs, metals, detergents, or waxes.

Due to the particle size, FriktionTek® cannot be removed by oil filters nor can it clog hoses or filters. FriktionTek® only works on metal surfaces and has no effect on seals or gaskets. FriktionTek™ is compatible with all oil types and oil additives.

FriktionTek® products are fully underwritten and offer a product warranty.

Select : Advantages | Characteristics | Instructions | Dosage | Buy Online

Advantages

• Restores and protects metal-to-metal surfaces of the cylinder-piston group, crank and gas distributing parts against wear;
• Reduces fuel consumption (by up to 30% at idling);
• Increases oil pressure to the nominal one;
• Restores compression in cylinders;
• Increases engine power;
• Improves acceleration capability;
• Decreases noise and vibration;
• Extends service life of the engine parts ( up to 2-3 times longer);
• Improves cold starts and protects the engine against their negative consequences;
• Shows noticeable improvment within 75 - 100 miles

Technical characteristics

• General characteristics of the cermet layer:
• Microhardness – 750 kg/mm2;
• High corrosion resistance;
• Roughness Ra up to 0.06 mkm.

Instructions

Select: High Mileage Restoration | Low Mileage Protection

High Mileage Restoration Treatment: For vehicles with more than 75,000 miles or vehicles experiencing problems (average car, SUV or light-duty truck that holds 3-10 quarts of oil)

• Step 1
  Warm engine for 10 - 15 minutes.
  Add 18 ML cartridge of Gasoline Engine Treatment to crankcase. DO NOT ADD TO GAS TANK.
  
  Start the engine and let it idle for 5-10 minutes.
  
• Step 2
  Warm engine for 10 - 15 minutes.
  Add another cartridge of Gasoline Engine Treatment to crankcase. DO NOT ADD TO GAS TANK.
  
  Start the engine and let it idle for 5-10 minutes.

Low Mileage Protection Treatment: For vehicles with less than 75,000 miles in good working condition (average car, SUV or light-duty truck that holds 3-10 quarts of oil)

• One Step Process
  Warm engine for 10 - 15 minutes.
  Add 18 ML cartridge of Gasoline Engine Treatment to crankcase. DO NOT ADD TO GAS TANK.
  
  Start the engine and let it idle for 5-10 minutes.

Recommended Dosage

High Mileage Engine (100,000 miles and vehicles with signs of problems)

• two 18 Ml Cartridge

Lower Mileage Vehicle (100,000 miles or less)

• one 18 Ml Cartridge

Note!

• Do not change oil for 1000 miles, when treatment process is complete.
• The protective cermet coating forms on any operative mechanism with no effect on seals or gaskets.
• If the engine is in critical state, worn parts must be replaced.

US EnviroTech, Inc. © 2008 All Rights Reserved | Sitemap | Disclaimer | Contact | 888-526-3318