The compound is designed for protection against wear and restoring repair of automatic transmissions without disassembling. The gel forms a new ceramic-metal coating on friction surfaces. As a result a renovated unit exceeds the performance level of a new one and will serve you 2-4 times longer. Applied for hydraulic system revitalization.

Advantages

• decreases loads on automatic transmissions;
• increases performance level
• improves the accuracy of hydraulic systems operation after 50-100 km run;
• reduces noise and vibration in automatic transmissions;
• protects parts from wear in case of low oil level;
• eliminates pump howling.

Technical characteristics
General characteristics of the cermet layer:
Microhardness – 750 kg/mm2;
high corrosion resistance;
roughness Ra up to 0,06 mkm.

Application for Automatic Transmissions:
Most automatic transmissions require one treatment of TWO 9ml cartridges of XADO Gel. To help the gel travel down the filler tube, we recommend that you add the gel to a minimum of 1 oz of ATF oil.

Application for Steering Pump:
Add the gel-revitalizant into the steering pump reservoir. Check the operating oil level.

After adding the gel-revitalizant turn the steering wheel for 5-10 minutes.

Revitalization is considered to be finished after 50 hours of mechanism operation (1500 km/930 miles run).

Dosage:
1-2 Oil system volume | 1 tube | one time
2-5 Oil system volume | 2 tubes | one time
5-8 Oil system volume | 3 tubes | one time

Note.
The sure sign of revitalizing beginning is the improvement in steering gear operation (steering wheel force augmentation, operation accuracy, noise reduction) as early as the first miles of running.

If after 100-200 km run mechanism operation improvement does not occur, the most probable cause is a mistaken diagnostics.