FriktionTek® by XADO Small Engine Treatment

PRODUCTS


9ML Small Engine Treatment

For small engines with working oil or combined oil / fuel volume up to 1000 cc .

Treatment results:

Increases engine power;

Improves acceleration capability;

Restores cylinder compression;

Decreases noise and vibration;

Restores oil pressure;

Prolongs engine life (by 2-3x);

Improves cold starts;

Reduces fuel consumption;

Decreases harmful emissions;

Restores and protects metal-to-metal surfaces against wear;

Shows noticeable improvement typically within 15 minutes of idle time (especially on high-mileage vehicles) and the process will be complete in 1,250 miles;

Lasts up to 65,000 miles.

 

FriktionTek® by XADO is a new and improved XADO Revitalizant® Gel Product



FriktionTek® by XADO Ceramic Small Engine Treatment is the best way to optimize your motor cycle, small watercraft and power tools (lawn mowers, chain saws, punchers, drills etc.) overall performance without disassembly.

Unlike traditional engine oil additives, FriktionTek® does more than just coat. Our treatment actually resurfaces your engine's internal metal parts to eliminate noise, smoking and vibration while increasing horsepower and improving gas mileage.

FriktionTek® simultaneously cleans, restores and protects worn parts creating a smoother, more durable surface. It effectively optimizes performance while reducing friction and wear.

While the science is advanced, the application is simple. FriktionTek® by XADO works by applying a long-lasting ceramic-metal (cermet) surface to engines while you drive. It penetrates metal surfaces up to 30 microns deep and forms a strong new ceramic-metal bond.

By reducing friction and heat, the technology provides similar benefits to traditional lubricants but works in a completely different way. FriktionTek® does not modify the oil in any way. Instead, it modifies the surface structure of the metal to make it act more like a ceramic. Ceramic-metal alloys (known for their strength, durability, smoothness, high heat resistance and regenerative properties) have been used for decades in racing, industry, aviation and nuclear propulsion. With FriktionTek®, a ceramic-metal coating can now be applied without disassembly. By eliminating labor, FriktionTek® provides a huge cost savings with the same benefit..

Advantages

FriktionTek® by XADO resurfaces all internal metal friction surfaces of small engines.

Technical characteristics

Microhardness: 690-710 HV
Friction Coefficient: up to 0.003 µm
Melting Point: 2,900ºF
Corrosion Resistance: High

FriktionTek® by XADO is an eco-friendly product. It is non-toxic and non-flammable. FriktionTek® Ceramic Engine oil additive consists of a natural ceramic compound suspended in a synthetic gel. It contains no PTFEs, metals, detergents, chlorine or waxes.

Due to the particle size, FriktionTek® cannot clog oil filters or hoses. It only works on metal surfaces and has no effect on seals or gaskets. FriktionTek® is compatible with all oil types and oil additives.

Treatment procedure for small engines:
with combined fuel and oil system

Warm your engine up to its normal running temperature.

Turn off. Add FriktionTek to the gas tank.

Start engine and let idle or run for at least 15 minutes.

with separate fuel and oil system

Warm your engine up to its normal running temperature.

Turn off. Add FriktionTek to the oil filler tube.

Start engine and let idle or run for at least 15 minutes.

Note!
The compound is equally effective for any two- and four-cycle engines of any model.

Double the dose if the volume of the engine is more than 1000 cc.

 

  
  All packages
 



Call 1-888-526-3318 or click here email for pricing and availability.
 

 
 


 
   
   
 
   
   
   
   


 

 

US EnviroTech, Inc. © 2008 All Rights Reserved | Sitemap | Disclaimer | Contact | 888-526-3318