| |
FriktionTek® by XADO Trucking Solutions
Industry Challenges
- Reducing impact of rising fuel costs
- Increasing operational efficiency by reducing equipment down-time
- Decreasing oil-blow by
- Reducing noise pollution
- Mitigating environmental impact of harmful emissions
FriktionTek® Solution
FriktionTek® Treatments and Greases Can be used on any metal-to-metal contact surface in all moving parts of vehicles:
Case studies of FriktionTek® by XADO Products used for gas and diesel vehciles have many benefits:
-
Lowers Fuel Costs – Using FriktionTek® typically will reduce fuel consumption by at least 5-7% and up to 30% when idling. FriktionTek® by XADO has an International Product Certification from TUV for effectiveness in reducing fuel consumption. Independent SAE testing also shows a marked reduction in fuel consumption.
-
Reduce Emissions – FriktionTek® by XADO is certified effective by TUV in reducing CO2, CO and HC emissions.
-
Lower Maintenance Costs – our cermet surface is far more durable and less susceptible to wear than metal parts.
-
Increase Compression – FriktionTek® by XADO is certified effective by TUV in increasing compression and improving engine performance.
-
Reduces and Normalizes Oil Blow By
-
Reduce Noise and Vibration providing a smoother ride and less fatigue.
FriktionTek® is compatible with any mineral or synthetic oil, grease or fuel grade. It is chemically inert with respect to these substances, and does not affect their viscosity. Oil or grease is the vehicle in getting the ceramic-metal conditioner to the friction surfaces.
In real world studies, FriktionTek® by XADO treatment lasts 65,000 miles and up to 15 oil changes.
Applications
The following are the various types of industrial equipment and machinery that can be treated with FriktionTek® and the myriad benefits that accrue from it:
Diesel Engines & Reefer Units
FriktionTek® Treatments are designed for restoration and repair of all types of diesel engines.
Results of the treatment include:
- Restores the geometry of friction surfaces and protects them from wear;
- 10-30% reduction in the friction coefficient;
- Fuel savings at idle up to 30%, 5-10% overall;
- Increases oil pressure in worn engines;
- Increases and equalizes compression in the cylinders;
- Restores engine power;
- Reduces engine noise and vibration;
- Reduces exhaust emissions.
Back to top
Manual Transmissions, Differentials, Gear Boxes, Transfer Cases & Reducers
Results of the treatment include:
- Reconditioning and protection against wear of the rubbing parts;
- Restoration of the geometry of the parts;
- Elimination of pits and scratches on the working surfaces;
- 100-300 times reduction in the friction coefficient;
- Considerable fuel savings on all-wheel-drive vehicles;
- 10 times reduction in noise and vibration;
- Possibility of protracted service (up 1000 km) after an accidental oil leakage.
Product
Back to top
Automatic Transmissions, Hydraulic Systems, & Power Steering
Results of the treatment include:
- Reconditioning and protection against wear of the rubbing parts;
- Restoration of the geometry of the parts;
- Elimination of pits and scratches on the working surfaces;
Back to top
CV Joints / Bearings
- Reduce wear by 2 - 2.5 times
- Decrease in fuel consumption
- Decrease in noise and vibration levels
- Works on vehicle hub bearings, ball bearings and hinges, cardan joints of transmission, bearings of pump and generators
|
MORE
|
